Welcome to the New Upgraded BBQ Source Forums. Please let us know if you have any issues with the new site, we will be customizing it for a while to get it looking as sharp as ever. 

Thanks,

Bluesin

sofasurfer

Let me ask this again- Is my grill safe or is there a problem?

5 posts in this topic

An earlier post was "why do my burners leak flame". It did not get much response and I think it was a badly worded post. So I am going to ask again and supply a better picture.

 

Lowes Bar-b-q Grillware model 2616. I just got new burners for it. I installed them and when I click the ignitor I get a tall, yellow flame danceing on the top of the "collector box" (see, I've learned some new terminology since last time). It usually does not last long but sometimes it does. I removed the firebox and turned it over to get a good view. I wonder if this collector box is leaking. You may be be able to see in the photo that there is a seam that runs the length of the collector box. Looks to me like it SHOULD leak. Anyway, whatever it is, does the gas to the collector box run continuously or does it shut off after the burner lites?

post-13269-0-37758800-1335308660_thumb.jpg

post-13269-0-62462600-1335308668_thumb.jpg

post-13269-0-21593200-1335308748_thumb.jpg

Share this post


Link to post
Share on other sites

I hooked it back up but kept the firebox raised up so I could see what exactly is happening. Indeed, the flame is coming out of the seam on the collector. The flame is also touching the ignitor wires, although they are not burned. And it does look as though the ignitor looses fuel after the burner lites. So, should I replace the collector boxes? I do not understand why they are manufactured with a seam if it is not supposed to leak. Hmmmmm.

 

 

An earlier post was "why do my burners leak flame". It did not get much response and I think it was a badly worded post. So I am going to ask again and supply a better picture.

 

Lowes Bar-b-q Grillware model 2616. I just got new burners for it. I installed them and when I click the ignitor I get a tall, yellow flame danceing on the top of the "collector box" (see, I've learned some new terminology since last time). It usually does not last long but sometimes it does. I removed the firebox and turned it over to get a good view. I wonder if this collector box is leaking. You may be be able to see in the photo that there is a seam that runs the length of the collector box. Looks to me like it SHOULD leak. Anyway, whatever it is, does the gas to the collector box run continuously or does it shut off after the burner lites?

Share this post


Link to post
Share on other sites

An earlier post was "why do my burners leak flame". It did not get much response and I think it was a badly worded post. So I am going to ask again and supply a better picture.

 

Lowes Bar-b-q Grillware model 2616. I just got new burners for it. I installed them and when I click the ignitor I get a tall, yellow flame danceing on the top of the "collector box" (see, I've learned some new terminology since last time). It usually does not last long but sometimes it does. I removed the firebox and turned it over to get a good view. I wonder if this collector box is leaking. You may be be able to see in the photo that there is a seam that runs the length of the collector box. Looks to me like it SHOULD leak. Anyway, whatever it is, does the gas to the collector box run continuously or does it shut off after the burner lites?

Yes there is a problem

Burners should not leak flame

That is usually a sign of blockage of some type

Have you done the following

1 Checked the entire grill for spider webs

2 Checked the entire grill for insects

3 Made sure you checked the burners foe obstructions before you installed them

4 Made sure they are the right burners

5 Made sure you put the burners in the right way

6 Made sure you cleaned the grill

Share this post


Link to post
Share on other sites

So this just started after changing the burners? Have you tried putting the old burners back in and seeing if this does not occur? If it does not I would have to blame the new burners...maybe too small of a diameter and or too small of ports in the burners? Just a thought!

Share this post


Link to post
Share on other sites

to answer your question does the gas to the collector stay on all the time? yes it will unless you have a seperate light position or detent built into the burner gas control

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now